Proteco 24 Volt DC Worm Drive Operators

ARCO Harmonic Arm Operators

The ARCO Harmonic arm operator has been on the market for over twenty years proving its worth and reliabilty.

The self contained unit requires a 240 volt AC input which is transformed and rectified into 12 Volt DC.

This operator is designed to suit a swing gate which needs to open beyond 110 degress. Battery back-up is available in case of a power failure on all low voltage units.

Sliding Gate Remote Control Operators

Within the Gibidi Sliding Gate remote range there are operators capable of driving gate weights of 600Kg , 800KG , 1200Kg  and 2500KG.

The operator illustrated is a Gibidi Pass 600 Rego.  This operator is a 240 volt gear motor thus has the capacity to open and close gates of a weight of 600 KG.

All of the Gibidi Sliding gate motors have a user friendly manual release key in case of a power failure.

Gibidi sliding gate motors are 240 volt rated therefor battery back-up is not available.

ATA Neo Slider unit

A.T.A NEO Sliding Gate remote is capable of driving gate weights of 600Kg .

The ATA NEO Sliding gate motors have a user friendly manual release key in case of a power failure.

Some of the key features of the ATA Neo include the following functions:

Auto Close

Courtesy Light

Pedestrian mode

Soft start * stopping

Gate profiling

Service reminders

And is solar ready

VRC 12 Volt Linear Drive Units

The E8 VRC screw drive units are designed to operate a large range of swing gates.  They have a slim and elegant look and come with stainless steel cowlings.

Being a low voltage unit we can install the power transformer against an existing power point and run from this location to the operators in 12 volt DC low voltage wiring, eliminating the need to run costly 240 volt power to the gates.  Battery back-up is available in case of a power failure on all low voltage units.